 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin PD-20714 rev. C 03/03 21DQ06 SCHOTTKY RECTIFIER 2 Amp DO-41 Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM VF TJ @ 2 Apk, TJ = 125C range Description/Features Units A V V C The 21DQ06 axial leaded Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. Low profile, axial leaded outline High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability 21DQ06 2 60 0.55 - 40 to 150 CASE STYLE AND DIMENSIONS Conform to JEDEC Outline DO-204AL (DO-41) Dimensions in millimeters and inches www.irf.com 1 21DQ06 Bulletin PD-20714 rev. C 03/03 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 21DQ06 60 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current * See Fig. 4 IFSM EAS IAR Max. Peak One Cycle Non-Repetitive Surge Current * See Fig. 6 Non-Repetitive Avalanche Energy Repetitive Avalanche Current 340 60 4.0 0.5 A mJ A 5s Sine or 3s Rect. pulse 10ms Sine or 6ms Rect. pulse Following any rated load condition and with rated VRRM applied 21DQ06 2 Units A Conditions 50% duty cycle @ TC = 106C, rectangular wave form TJ = 25 C, IAS = 1 Amps, L = 8 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM Max. Forward Voltage Drop (1) 21DQ06 Typ. 0.53 0.67 0.49 0.61 0.02 7.0 120 8.0 Max. 0.60 0.75 0.55 0.67 0.50 10 Units V V V V mA mA pF nH @ 2A @ 4A @ 2A @ 4A Conditions TJ = 25 C TJ = 125 C VR = rated VR IRM CT LS Max. Reverse Leakage Current (1) Typical Junction Capacitance Typical Series Inductance TJ = 25 C TJ = 125 C VR = 5VDC(test signal range100Khz to 1Mhz) 25C Measured lead to lead 5mm from package body (1) Pulse Width < 300s, Duty Cycle <2% Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range 21DQ06 Units Conditions -40 to 150 -40 to 150 100 25 C C C/W DC operation Without cooling fin C/W DC operation (See Fig. 4) RthJA Max. Thermal Resistance Junction to Ambient RthJL Typical Thermal Resistance Junction to Lead wt Approximate Weight Case Style (*) dPtot dTj < 1 Rth( j-a) 0.33(0.012) g (oz.) DO-204AL(DO-41) thermal runaway condition for a diode on its own heatsink 2 www.irf.com 21DQ06 Bulletin PD-20714 rev. C 03/03 1 00 10 1 0 .1 0.01 25C 0 .001 Instantan eous Forw ard C urrent - I F (A) T J = 150C 125C 100C 75C 50C Reverse C urrent - I R (m A) 10 0 .000 1 0 T = 150C J J 20 40 60 Reverse V oltag e - VR (V ) T = 125C 1 T J = 25C Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage 100 0 (pF) Jun ction C apacitan ce - C T 10 0 T J = 25C 0.1 0 0.3 0.6 0.9 1 .2 Forward V olta ge D rop - V FM (V) 10 0 20 40 60 Reverse V olta ge - V R (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage www.irf.com 3 21DQ06 Bulletin PD-20714 rev. C 03/03 1 50 Allowa ble Lead Te m pe ratu re - ( C ) 2 Average Power Loss - (W atts) DC 1 20 1.6 90 Square w ave (D = 0.50) 80% Rated V R applied 1.2 D D D D D = = = = = 0.20 0.25 0.33 0.50 0.75 DC 60 0.8 RM S Lim it 30 = 1/8 inch see note (2) 0.4 0 0 1 2 3 Average Forw ard C urren t - I F(AV ) (A) 0 0 1 2 3 Average Forw ard C urren t - I F(AV) (A) Fig. 4 - Maximum Allowable Lead Temperature Vs. Average Forward Current Fig. 5 - Forward Power Loss Characteristics 1000 Non-Repe titive Surge C urren t - I FSM (A) 100 At Any Rated Load C ondition And W ith Rated V RRM Applied Follow ing Surge 10 10 100 1000 10000 Square W ave Pulse D uration - t p (m icrosec) Fig. 6 - Maximum Non-Repetitive Surge Current (2) Formula used: TL = TJ - (Pd + PdREV) x RthJL ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 5); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 21DQ06 Bulletin PD-20714 rev. C 03/03 Ordering Information Table Device Code 21 1 1 2 3 4 5 - D 2 Q 3 06 4 TR 5 21 = 2.1A (Axial and small packages - Current is x10) D = DO-41 package Q = Schottky Q.. Series 06 = Voltage Rating : 60V TR = Tape & Reel package ( 5000 pcs) TB = Tape & Box package (Ammunition -3000 pcs) = Box package (1000 pcs) Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 03/03 www.irf.com 5 |
Price & Availability of 21DQ06
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |